K&S Co.,Ltd Web Site

Innovative R/C Designs

---

No.2815

---

This 100% fluorine lubricant is made by melting fluorine powder in the fluoride solution.
Applying this liquid to the rotation parts or sliding parts on a helicopter boosts the performance remarkably, regardless of the helicopter size.
Fluoride solution volatilizes fast, so it dries immediately once applied.
It does not corrode plastic or rubber material and can be used for multiple purposes.

** Some ingredients in ordinary grease may corrode the resin material, which is commonly used in helicopter models.
Please use K&S2815 Fluorine Liquid Grease (Recommended for the shaft parts) or K&S2440Pure Fluorine Grease (Recommended for the gear parts.)

---

No.2814

---

This blade holder is made of urethane foam.

Using this product, you can safely transport the helicopter with your main rotor installed. The groove on the holder is for rubber band fix and prevents it from failing off from the tail pipe

---

No.2812

---

K&S Magic Strap (50cm, 2pcs/pack)

The buckle part of this product allows you to adjust the belt length. Remove the 3 screws and cut the belt to the length you desired, then put back the screws, done.

Not too long, not too short, you can make the strap fit perfectly to the size of the item (e.g. lipo battery) you want to fix.

Set includes:
Strap x2pc
Backup buckle x1set

---

No.2811.1

---

This is a simple and useful transmitter stand.

It is compatible with JR and Futaba models and easy to use.

The stopper design prevents the transmitter from slipping

---

No.2811

---

This is a simple and useful transmitter stand.

It is compatible with JR and Futaba models and easy to use.

The stopper design prevents the transmitter from slipping.

---

No.2810

---

With the evaluation that just the radial bearing is not strong enough to absorb increasing force from the enhanced engine/motor, we developed this bearing case with thrust BRG (endurance test 1t).

This product is a necessity to make the mast rotate efficiently

---

No.2809

---

Washout screw with nylon nuts.
The common E-ring or the stop ring type both leave space. When a great force is exerted on the fixed part, backlash is likely to occur.
These screw-type washout pins fix securely and leave no space.

こちらのブログもご覧ください。

---

No.2808

---

Attach with quick drying glue to RC helicopter bodies or canopies.
These large dampers absorb vibration and noises well.

取付方法はこちらをご覧ください。
こちらのブログもご覧ください。

---

No.2807

---

A metal gas pump unit designed for durability and large supply capability.
The main part is machined from duralumin, and the drive shaft is made from heat-treated polished stainless steel.
Combine with special O-ring (Perfluor) for outstanding durability.
(Passed 200 consecutive testing hours without using lubricant)
Size matches with all the KS hand pumps.

こちらのブログもご覧ください。

---

No.2806

---

A metal gas hand pump designed for durability and large supply capability.
The main part is machined from duralumin, and the drive shaft is made from heat-treated polished stainless steel.
Combine with special O-ring (Perfluor) for outstanding durability.
(Passed 200 consecutive testing hours without using lubricant)

こちらのブログもご覧ください。

---

No.2805

---

Tip covers for the propeller, to ensure safe transport.
Propeller tips can be as dangerous as sharp blades if not protected correctly. During transportation, they may damage other helicopter parts or even hurt the person moving them.
These special propeller protectors reduce these risks, keeping the pilot and helicopter safe.
Using a cutter knife, cut a slit in the cover to match the propeller size and slide over the propeller tip.

---

No.2804

---

This shrink tubing packs the cells of the battery.
This product can be used by pilots who assemble the batteries themselves.
If your battery appears worn or dirty, use this battery shrinking tube to make it look new again.

---

No.2802

---

Carbon main rotor for flybarless rotor heads.
The upper and lower sides are different in color for better visibility.
Since it is very lightweight, it can exert the maximum potential of 3-axis gyro, improving the flight performance.

Length: 720mm
Width: 62mm
Grip: 14mm
Drag Hole: 5mm
Rotor shape: Symmetric

---

No.2801.1

---

The recently released brushless motor and engine power keeps rising. Many people have noticed that the tail part vibrates during 3D flights because its lack of rigidity.
For 3D flights, pipe strength has been boosted by increasing the width to 10mm, effectively reducing the vibration.
We prepared 2 types with different mounting hole distance ? 460mm and 560mm. Please choose the best fit for your model.

---

No.2801

---

The recently released brushless motor and engine power keeps rising. Many people have noticed that the tail part vibrates during 3D flights because its lack of rigidity.
For 3D flights, pipe strength has been boosted by increasing the width to 10mm, effectively reducing the vibration.
We prepared 2 types with different mounting hole distance ? 460mm and 560mm. Please choose the best fit for your model.

---

No.2800.1

---

The recently released brushless motor and engine power keeps rising. Many people have noticed that the tail part vibrates during 3D flights because its lack of rigidity.
For 3D flights, pipe strength has been boosted by increasing the width to 10mm, effectively reducing the vibration.
We prepared 2 types with different mounting hole distance ? 460mm and 560mm. Please choose the best fit for your model.

The recently released brushless motor and engine power keeps rising. Many people have noticed that the tail part vibrates during 3D flights because its lack of rigidity.
For 3D flights, pipe strength has been boosted by increasing the width to 10mm, effectively reducing the vibration.
We prepared 2 types with different mounting hole distance ? 460mm and 560mm. Please choose the best fit for your model.

---

No.2800

---

The recently released brushless motor and engine power keeps rising. Many people have noticed that the tail part vibrates during 3D flights because its lack of rigidity.
For 3D flights, pipe strength has been boosted by increasing the width to 10mm, effectively reducing the vibration.
We prepared 2 types with different mounting hole distance ? 460mm and 560mm. Please choose the best fit for your model.

---

No.2798

---

This tail support clip is machined from duralumin. It can fix the tail pipe securely.
In order to fit with the scale body and competition body, the horizontal tail wing stay is abridged. Thus it is small and light.
It can be set in the middle of rod guide.

---

No.2797

---

This pitch gauge is used in measuring the main rotor pitch.
Compatible models range from 500 E class to 90 class.
Measurement range: -15 deg. To +15 deg.

---